PROFILE

NAME

SUZUKI, Motoyuki

TITLE

Professor, Dr. of Engineering

FIELD

Concrete Engineering

UNIVERSITY

Tohoku University [1975]

GRADUATE SCHOOL

Tohoku University, The Graduate School [1977]

EMAIL

PHONE

+81-22-795-7446

FAX

+81-22-795-7448

SUBJECTS

Structural Safety Evaluation
Seismic Design of Concrete Structures
Dynamic Behavior of Reinforced Concrete Structures
Mechanical Behavior of High Strength-Reinforced Concrete Member

CONTRIBUTIONS

Papers

1. Mitsuyoshi Akiyama, Hideki Naito, Kiyoshi Ono, Kyohei Yamaguchi and Motoyuki Suzuki: Seismic performance evaluation of concrete filled spiral steel tubes based on reversal cyclic loading tests, Journal of Structural Engineering, Japan Society of Civil Engineers, Vol.55A�Cpp.662-669�C2009.3
2. Mitsuyoshi AKIYAMA, Hiroshi MATSUZAKI, Hirokazu SATO, Hideki NAITO and Motoyuki SUZUKI: MAXIMUM AMOUNT OF REINFORCING BAR CORROSION AND RELIABILITY-BASED DURABILITY DESIGN TO ENSURE THE SEISMIC SAFETY OF RC BRIDGE PIERS EXPOSED TO MARINE ENVIRONMENT, Proc. of the JSCE E, Vol.64, No.4, pp.541-559, 2008.10
3. Kyohei YAMAGUCHI, Mitsuyoshi AKIYAMA, Hideki NAITO and Motoyuki SUZUKI : Mechanical properties of circular CFT columns under concentric compression, Proceedings of the Japan Concrete Institute, Vol.30, No.3, pp.1327-1332, 2008.7
4. Taiju ASANUMA, Mitsuyoshi AKIYAMA, Kei SATO and Motoyuki SUZUKI : Use of prestressing to improve load bearing capacity of RC piles with high-strength materials, Proceedings of the Japan Concrete Institute, Vol.30, No.3, pp.1003-1008, 2008.7
5. Hideki NAITO, Kouichi SANDO, Hideyuki KOGA and Motoyuki SUZUKI : Freezing and thawing resistance of concrete with the initial cracks, Proceedings of the Japan Concrete Institute, Vol.30, No.1, pp.915-920, 2008.7
6. Hiroshi MATSUZAKI, Mitsuyoshi AKIYAMA and Motoyuki SUZUKI : Reliability-based durability design of RC structures under marine environments using partial factors, Proceedings of the Japan Concrete Institute, Vol.30, No.1, pp.729-734, 2008.7
7. Hirokazu SATO, Yuefeng LI, Mitsuyoshi AKIYAMA and Motoyuki SUZUKI: Reliability-Based Design of Reinforced Concrete Structures with Corrosion-Initiated Cracking, Proceedings of the Japan Concrete Institute, Vol.29, No.1, pp.1071-1076, 2007.7
8. Hiroshi MATSUZAKI, DANG Tuan Hai, Mitsuyoshi AKIYAMA and Motoyuki SUZUKI: Reliability-Based Demanded Capacity Hierarchy between RC Bridge Pier and Pile Foundation, Proceedings of the Japan Concrete Institute, Vol.29, No.3, pp.853-858, 2007.7
9. Hideki NAITO, Il-gu KANG, Mitsuyoshi AKIYAMA and Motoyuki SUZUKI: Seismic Design of SRC Piers Considering Restorability and Ultimate State of Members, Proceedings of the Japan Concrete Institute, Vol.29, No.3, pp.1351-1356, 2007.7
10. Kenta SASAKI, Shunji AOKI, Mitsuyoshi AKIYAMA and Motoyuki SUZUKI: Localized Compression Failure Zone of Concrete Filled Steel Tubular Columns, Proceedings of the Japan Concrete Institute, Vol.29, No.3, pp.1375-1380, 2007.7
11. Masato TERAZAWA, Hirotoshi KIMURA, Youji NAKAMURA and Motoyuki SUZUKI: Experimental Study on Durability of Surface Penetrants Used in Cold Region, Proceedings of the Japan Concrete Institute, Vol.29, No.2, pp.553-558, 2007.7
12. Hideki NAITO, Nobutaka SHIRAHAMA, Mitsuyoshi AKIYAMA, Masato TAKADA and Motoyuki SUZUKI: DUCTILITY EVALUATION OF SRC COLUMNS PREDICTING THE LOCAL BUCKLING OF THE H-SHAPED STEEL, Proc. of the JSCE E, Vol.62, No.4, pp.698-712, 2006.11
13. Mitsuyoshi AKIYAMA, Masatoshi WATANABE, Satoshi ABE, Song Tao CUI, Naomi MAEDA and Motoyuki SUZUKI: COMPRESSIVE FRACTURE BEHAVIOR AND MECHANICAL PROPERTIES OF RC COLUMNS WITH NORMAL- AND HIGH-STRENGTH MATERIALS UNDER CONCENTRIC COMPRESSION, Proc. of the JSCE E, Vol.62, No.3, pp.477-496, 2006.8
14. Mitsuyoshi AKIYAMA, Yuka ITO and Motoyuki SUZUKI: RELIABILITY-BASED DURABILITY DESIGN OF REINFORCED CONCRETE STRUCTURES EXPOSED TO MARINE ENVIRONMENTS, Proc. of the JSCE E, Vol.62�CNo.2�Cpp.385-401�C2006.6
15. Mitsuyoshi AKIYAMA, Yuka ITO and Motoyuki SUZUKI: RELIABILITY-BASED DURABILITY DESIGN OF REINFORCED CONCRETE STRUCTURES EXPOSED TO MARINE ENVIRONMENTS, Proc. of JSCE, E, Vol.62, No.2, pp.385-401, 2006.6
16. Satoshi ABE, Mitsuyoshi AKIYAMA, Naomi MAEDA and Motoyuki SUZUKI: Effect of Shape Size of Specimen on Mechanical Properties of High Strength Confined Concrete, Proceedings of the Japan Concrete Institute, Vol.28, No.2, pp.613-618, 2006.7
17. Hideki NAITO, Daisuke MATSUMOTO, Mitsuyoshi AKIYAMA and Motoyuki SUZUKI: Local Buckling Analysis of Steel Tube of Concrete-Filled Steel Tube Columns, Proceedings of the Japan Concrete Institute, Vol.28, No.2, pp.1255-1260, 2006.7
18. Toshiyuki SASAKI, Mitsuyoshi AKIYAMA, Naomi MAEDA and Motoyuki SUZUKI: Localized Compressive Failure Zone of High-Strength RC Columns under Uniaxial Compression, Proceedings of the Japan Concrete Institute, Vol.27, No.2, pp.697-702, 2005.6
19. Hideki NAITO, Nobutaka SHIRAHAMA, Masato TAKADA and Motoyuki SUZUKI: Local Buckling Behavior of H-Shaped Steel of SRC Columns Subjected to Reversal Cyclic Loading, Proceedings of the Japan Concrete Institute, Vol.27, No.2, pp.1219-1224, 2005.6
20. Yuka ITO, Mitsuyoshi AKIYAMA and Motoyuki SUZUKI: A Study on Probabilistic Model of a Chloride Attack for Durability Design of RC Structures, Proceedings of the Japan Concrete Institute, Vol.27, No.2, pp.1477-1482, 2005.6
21. Mitsuyoshi AKIYAMA, Kee-Nam HONG, Masaru SUZUKI, Toshiyuki SASAKI, Naomi MAEDA and Motoyuki SUZUKI: Hideki NAITO, Mitsuyoshi AKIYAMA, Masato TAKADA, Shinsuke SHIMIZU, Kee-Nam HONG and Motoyuki SUZUKI: CONCENTRIC LOADING TEST OF RC COLUMNS WITH NORMAL- AND HIGH-STRENGTH MATERIALS AND STRESS-STRAIN MODEL FOR CONFINED CONCRETE CONSIDERING COMPRESSIVE FRACTURE ENERGY, Proc. of JSCE, No.788/V-67, pp.81-98, 2005.5
22. Hideki NAITO, Mitsuyoshi AKIYAMA, Masato TAKADA, Shinsuke SHIMIZU, Kee-Nam HONG and Motoyuki SUZUKI: Modeling of plastic curvature distribution of SRC columns subjected to reversal cyclic loading and its application to ductility evaluation of columns predicting buckling of longitudinal bars, Journal of Structural Engineering, Vol.51A, pp.1415-1424, 2005.3
23. Michihiro SAKURADA, Hiroyoshi WATANABE, Takashi OHURA and Motoyuki SUZUKI: Study on the Mechanical Behaviors of Prestressed Concrete Beams Using Artificial Lightweight Aggregates Made from Fly Ash, Proc. of JSCE, No.774/V-65, pp.27-37, 2004.11
24. Keiichi SAITO, Hiroyuki TAKAHASHI, Tadayoshi ISHIBASI, Kyuuichi MARUYAMA, Mitsuyoshi AKIYAMA and Motoyuki SUZUKI: The Shear Strength of Reinforced Concrete Beams Under Multiple Points Load, Proc. of JSCE, No.767/V-64, pp.87-98, 2004.8
25. Hideki Naito, Shinsuke SHIMIZU, Shigeo AOKI and Motoyuki SUZUKI: Experimental Study on Evaluation of Ductility of RC and SRC Columns Predicting the Damage of Members, Proceedings of the Japan Concrete Institute, Vol.26, No.2, pp.205-210, 2004.7
26. Kee-Nam HONG, Mitsuyoshi AKIYAMA, Naomi MAEDA and Motoyuki SUZUKI: Experimental Study on Behavior of High-Strength Concrete Columns under Concentric Compression, Proceedings of the Japan Concrete Institute, Vol.26, No.2, pp.793-798, 2004.7
27. Mitsuyoshi AKIYAMA, Fumitaka NOGUCHI, Yuka ITO and Motoyuki SUZUKI: Reliability-Based Seismic Design of RC Piers Based on Probabilistic Seismic Hazard Analysis, Proceedings of the Japan Concrete Institute, Vol.26, No.2, pp.1147-1152, 2004.7
28. Mitsuyoshi AKIYAMA, Wei Lun WANG, Naomi MAEDA and Motoyuki SUZUKI: Shear strength equation of RC beams using concrete of compressive strength up to 130 N/mm2 and stirrup of yield strength up to 1200 N/mm2, Proc. of JSCE, Jounal of Structural Engineering, Vol.50A, pp.907-917, 2004.3
29. Mitsuyoshi AKIYAMA, Kee-Nam HONG, Masayoshi SATO, Masaru SUZUKI, Naomi MAEDA and Motoyuki SUZUKI: Eefect of Transverse Reinforcement on Behavior of High Strength Concrete Columns Under Concentric Compression and Its Modeling of Stress-Strain Relationship, Proc. of JSCE, Vol.753/V-62, pp.137-151, 2004.2
30. Keiichi SAITO, Katsutoshi TANAKA, Tadayoshi ISHIBASI, Toshio TERADA, Mitsuyoshi AKIYAMA, Motoyuki SUZUKI and Masafumi IMAI: SHEAR STRENGTH OF REINFORCED DEEP BEAMS WITH MULTIPLE LAYERS OF LONGITUDINAL BARS, Proc. of JSCE, No.746/V-61, pp.181-195, 2003.11
31. Motoyuki SUZUKI, Mitsuyoshi AKIYAMA, Wei Lun WANG, Masayoshi SATO, Naomi MAEDA and Yutaka FUJISAWA: Shear Strength of RC Beams without Stirrup Using High-Strength Concrete of Compressive Strength Ranging to 130 MPa, Proc. of JSCE, No.739/V-60, pp.75-91, 2003.8
32. Fumitaka Noguchi, Mitsuyoshi AKIYAMA, Hiroshi NISHIO and Motoyuki SUZUKI: Seismic Design of Prestressed Concrete Tank Pile Foundations Subjected to Level II Earthquake Motion, Proc. of the JCI, Vol.25, No.2, pp.1243-1248, 2003.7
33. Hideki NAITO, Mitsuyoshi AKIYAMA and Motoyuki SUZUKI: Hysteresis Model of RC and SRC Columns Considering the Buckling of Bars, Proc. of the JCI, Vol.25, No.2, pp.1189-1194, 2003.7
34. Mitsuyoshi AKIYAMA, Daisuke MARUYAMA and Motoyuki SUZUKI: Uncertainties Affecting the Seismic Reliability of RC Structures, Proc. of the JCI, Vol.25, No.2, pp.1177-1182, 2003.7
35. Takayuki MORI, Motoyuki SUZUKI, Masato TERAZAWA and Hisashi ANDO: Development of Admixture for Increasing Tensile Strength, Proc. of the JCI, Vol.25, No.1, pp.149-154, 2003.7
36. Makoto SATOH, Masahiko MAITA, Hiroshi NAKAMURA and Motoyuki SUZUKI: Mechanism of Strength Development and Ductility of Concrete Incorporating Accelerating Admixture, Proc. of the JCI, Vol.25, No.1, pp.119-124, 2003.7
37. Keiichi SAITO, Tadayoshi ISHIBASHI, Omi IRYO, Mitsuhiro TAKEDA, Mitsuyoshi AKIYAMA and Motoyuki SUZUKI: Shear Strength of Reinforced Concrete Linear Members with Variable Effective Depth, Proc. of JSCE, Vol.725/V-58, pp.71-83, 2003.2
38. Hiroshi NISHIO, Hiroshi YOKOYAMA, Mitsuyoshi AKIYAMA, Yuji ONO, Shinya ESUMI and Motoyuki SUZUKI: Seismic Performance Evaluation for Side Wall of Prestressed Concrete Tank Subjected to Level II Earthquake Motions, Proc. of JSCE, No.725/V-58, pp.85-100, 2003.2
39. Mitsuyoshi AKIYAMA, Hideki NAITO and Motoyuki SUZUKI: Calculation Method of Ultimate Curvature of RC and SRC Section Based on Analytical Model for Axial Reinforcement Buckling and Its Application to Ductility Evaluation of These Columns, No.725/V-58, pp.113-129, 2003.2
40. Mitsuyoshi AKIYAMA, Mitsuru DOI, Ryoji MATSUNAKA and Motoyuki SUZUKI: Safety Factors for Seismic Design of RC Bridge Piers in Consideration of System Reliability, Proc. of JSCE, No.718/V-57, pp.1-17, 2002.11
41. Mitsuyoshi AKIYAMA, Ryoji MATSUNAKA, Mitsuru DOI and Motoyuki SUZUKI: RELIABILITY-BASED OPTIMAL DESIGN IN CONSIDERATION OF STRUCTURAL SYSTEM AND ITS APPLICATION TO EVALUATION OF SEISMIC PERFORMANCE OF RC BRIDGE PIERS, CONCRETE LIBRARY OF JSCE, No.39, pp.65-88, 2002.6
42. Daisuke MARUYAMA, Mitsuyoshi AKIYAMA and Motoyuki SUZUKI: Effect of Phase Characteristics of Ground Motions on the Seismic Response of RC Bridge Piers, Proc. of the JCI, Vol.24, No.2, pp.1009-1014, 2002.6
43. Hideki NAITO, Mitsuyoshi AKIYAMA and Motoyuki SUZUKI: Ductility Design of Reinforced Concrete Piers Based on Non-Linear Buckling Analysis of Bars, Proc. of the JCI, Vol.24, No.2, pp.991-996, 2002.6
44. Makoto SATO, Masahiko MAITA, Mitsuyoshi AKIYAMA and Motoyuki SUZUKI: Mechanisms of Strength Development of Concrete Incorporating Accelerating Admixture, Proc. of the JCI, Vol.24, No.1, pp.267-272, 2002.6
45. Motoyuki SUZUKI, Mitsuyoshi AKIYAMA, Yasunori YAMAZAKI, Ryoji MATSUNAKA and Mitsuru DOI: METHOD OF EVALUATING EARTHQUAKE SAFETY OF RC BRIDGE SYSTEM BASED ON RELIABILITY THEORY, CONCRETE LIBRARY OF JSCE, No.38, pp.33-50, 2001.12
46. Motoyuki SUZUKI, Mitsuyoshi AKIYAMA, Shinsuke TANAKA and Takamichi MARUNAKA: A PROPOSAL FOR THE RATIONAL SEISMIC DESIGN OF RC 2-STORY RIGID-FRAME VIADUCTS IN CONSIDERATION OF THE YIELD PROCESS, CONCRETE LIBRARY OF JSCE, No.37, pp.17-29, 2001.
47. Michihiro SAKURADA, Motoyuki SUZUKI, Hiroyoshi WATANABE and Nobuyasu MURAI: Experimental Study on Prestressed Concrete Beams with Artificial Light-weight Aggregates Made from Coal Ash, Proc. of the JCI, Vol.23, No.3, pp.559-564, 2001.6
48. Masaki ARAZOE, Motoyuki SUZUKI, Yuichi UCHIDA and Hiroshi YOKOTA: Shear Properties of RC Members using Artificial High Strength Aggregate made from Coal Ash, Proc. of the JCI, Vol.23, No.3, pp.775-780, 2001.6
49. H. Kobayashi, K. Nishio, M. Akiyama and M. Suzuki: Seismic Safety Evaluation of Prestressed Concrete Tank in Consideration of Level 2 Earthquake Motion, Proc. of the JCI, Vol.23, No.3, pp.1147-1152, 2001.6
50. Hideki NAITO, Mitsuyoshi AKIYAMA and Motoyuki SUZUKI: Study on Ductility Design of Concrete Encased Steel Frame Piers, Proc. of the JCI, Vol.23, No.3, pp.1261-1266, 2001.6
51. M. Akiyama, R. Matsunaka, M. Doi and M. Suzuki: Evaluation of Horizontal Seismic Coefficient for Cast in Place Pile Using Reliability-Based Optimal Design Considering Structural System, Proc. of JSCE, Jounal of Structural Engineering, Vol.47A, pp.743-752, 2001.3
52. Mitsuyoshi AKIYAMA, Hiroyuki HAYASHI, Hideki NAITO and Motoyuki SUZUKI: Analytical Study on Load-Deflection Characteristics of Concrete Encased Steel Columns Subjected to Reversal Cyclic Loading, Proc. of JSCE, Jounal of Structural Engineering, Vol.47A, pp.1453-1463, 2001.3
53. M. Akiyama, R. Matsunaka, M. Doi and M. Suzuki: Reliability-Based Optimal Design Considering Structural System and Its Application to Evaluation of Seismic Performance of RC Bridge Pier, Proc. of JSCE, No.662/V-49, pp.185-204, 2000.11
54. M. Suzuki, M. Akiyama, M. Sugita, H. Matsuyama and R. Udagawa: Development of Simple Mechanical Splice for Shear Reinforcement and Experimental Study on Its Application to RC Members, Concrete Research and Technology, Vol.11, No.3, 2000.9
55. Yasuhiro AKAKURA and Motoyuki SUZUKI: An Analysis of Evaluation Methods of Acceptable Risk for Earthquake Diasters Adopting a Death Toll as an Index, Proc. of JSCE, No.654/I-52, pp.317-334, 2000.7
56. Motoyuki SUZUKI, Mitsuyoshi AKIYAMA, Yasunori YAMAZAKI and Ryoji MATSUNAKA: Influence of Correlations between Strcutural Variables on the Seismic Safety of RC Bridge Piers, Concrete Library of JSCE, No.35, pp.119-133, 2000.6
57. M. Akiyama, R. Matsunaka, T. Machi and M. Suzuki: Seismic Design for RC Pier of Rigid-Frame-Bridge Based on Reliability Theory and Structural Optimization Procedure, Proc. of the JCI, Vol.22, No.3, pp.1297-1302, 2000.6
58. K. Ito, Y. Abe, K. Matsubara and M. Suzuki: Shear Properties of RC Beams Using Ultra High-Strength Materials without Stirrups, Proc. of the JCI, Vol.22, No.3, pp.967-972, 2000.6
59. M. Suzuki, M Akiyama, Y. Yamazaki, M. Matsunaka and M. Doi: Safety Evaluation Method of RC Bridge Systems under Earthquake Based on Reliablity Theory, Proc. of JSCE, No.648/V-47, pp.9-21, 2000.5
60. K. Ibayashi, Y. Ozaka and M. Suzuki: Damage Evaluation Method by Earthquake Input Energy and Damage Index in Reinforced Concrete Pier, Proc. of JSCE, Journal of Structural Engineering, Vol.45A, pp.807-814, 2000.3
61. M. Akiyama, R. Matsunaka, M. Doi and M. Suzuki: Evaluation of Horizontal Seismic Coefficient for Cast in Place Pile under the Consideration of Uncertainties in Reinforced Concrete Bridge Systems, Proc. of JSCE, No.641/V-46, pp.187-203, 2000.2
62. M. Suzuki, M. Mitsuyoshi, S. Tanaka and T. Marunaka: Proposal of Seismic Design Method of RC 2-Story Viaduct Considering the Yield Process, Proc. of JSCE, No.634/V-45, pp.269-278, 1999.9
63. R. Matsunaka, M. Suzuki, M. Akiyama and M. Doi: Study on Safety Evaluation Method of Structural System and Its Application to Seismic Design of RC Bridge Pier, Proceeding of JCI Symposium on Safety Evaluation of Concrete Structural Systems, pp.375-384, 1999.9
64. M. Doi, M. Suzuki, M.Akiyama and R. Matsunaka: The Probabistic Evaluation of Horizontal Seismic Coefficient for Cast in Place Foundation unde Consideration of the RC Bridge Pier Capacity, Proceeding of JCI Symposium on Safety Evaluation of Concrete Structural Systems, pp.429-438, 1999.9
65. M. Akiyama, M. Suzuki, S. Tanaka and T. Marunaka: Proposal of Seismic Design of RC 2-Story Viaduct, Proceeding of JCI Symposium on Safety Evaluation of Concrete Structural Systems, pp.475-484, 1999.9
66. Y. Yamazaki, R. Matsunaka, M. Mitsuyoshi and M. Suzuki: Safety Evaluation of Bridge System under Earthquake Based on Reliablity Theory, Proc. of the JCI, Vol.21, No.3, pp.1279-1284, 1999.7
67. M. Akiyama, S. Tanaka, T. Marunaka and M. Suzuki: A Proposal on the Rational Seismic Design Method of RC 2-Story Viaduct, Proc. of the JCI, Vol.21, No.3, pp.1225-1230, 1999.7
68. M. Doi, Y. Yamazaki, M. Akiyama and M. Suzuki: The Study on Damage Allocation between RC Bridge Pier and Pile Foundation under Earthquake Based on Reliability Theory, Proc. of the JCI, Vol.21, No.3, pp.1285-1290, 1999.7
69. Y. Abe, K. Ito, K. Matsubara and M. Suzuki: An experimental Study on Shear Capacity of Reinforced Concrete Beams without Shear Reinforcement Using Ultra High Strengh Materials, Proc. of the JCI, Vol.21, No.3, pp.181-186, 1999.7
70. M. Suzuki, M. Akiyama, Y. Yamasaki and R. Matsunaka: Influence of the Correlation between Structural Variables on the Seismic Safety of RC Bridge Pier, Proc. of JSCE, No.620/V-43, pp.175-185, 1999.5
71. M. Suzuki, M. Akiyama, S. Tanaka, T. Marunaka and S. Ukimoto: Influence of Yield Process of Each Member on Seismic Response of RC-2 Story Viaduct, Proc. of JSCE, Journal of Structural Engineering, Vol.45A, pp.1359-1367, 1999.3
72. M.Suzuki, M.AKiyama and Y.Yamazaki: Safety Evaluation Method of Structural System And Its Application to Seismic Design of RC Bridge Pier, Concrete Library of JSCE, No.32, pp.43-68, 1998.
73. T. Marunaka, S. Tanaka and M. Suzuki: Influece of Yield Process of Each Member on the Seismic Performance of RC 2-Story Viaduct, Proc. of the JCI, Vol.20, No.3, pp.1033-1038, 1998.
74. R. Matsunaka, Y. Yamazaki, M. Akiyama and M. Suzuki: Safety Evaluation Method of RC-Bridge Pier undere Earthquake Based on Reliability Theory Considering Correlation, Proc. of the JCI, Vol.20, No.3, pp.979-984, 1998.
75. M. Suzuki, K. Ibayashi, Y. Akakura, M. Fujiwara and Y. OZAKA: Evaluation Method for Lifetime Seismic Reliability of Reinforced Concrete Structures, Concrete Library of JSCE, No.31, pp.305-322, 1998.
76. M. Suzuki, N. Isago, M. Akiyama and S. Tanaka: Influence of the Ratio of Longitudinal and Shear Reinforcements on the Dynamic Behavior of RC 2-Story Viaduct, Proc. of JSCE, Jounal of Structural Engineering, Vol.44A, pp.1401-1412, 1998.3
77. M. Suzuki, K. Ibayashi, M. Fujiwara and Y. Ozaka: Relevance of Earthquake Ground Motion and Structural Characteristics to Damage of Reinforced Concrete Pier, Proc. of JSCE, Jounal of Structural Engineering, Vol.44A, pp.651-658, 1998.3
78. M. Suzuki, T. Ishikawa, H. Hasegawa and M. Fujiwara: Evaluation of Shear Strengh of RC Top Slab of Caisson Foundation, Concrete Research and Technology Japan Concrete Institute, Vol.9, No.1, pp.47-61, 1998.
79. M. Suzuki, M. Akiyama and Y. Yamazaki: Safety Evaluation Method of Structural System and Its Application to Seismic Design of RC Bridge Pier, Proc. of JSCE, No.578/V-37, pp.71-87, 1997.
80. H. Otsuka, M. Kanda, M. Suzuki and M. Kawakami: Dynamic Analysis Concerned with Rotational Displacement of Skewed Bridges Caused by Horizontal Ground Motion, Proc. of JSCE, No.570/I-40, pp.315-324, 1997.7
81. H. Otsuka, M. Kanda, M. Suzuki and T. Yoshizawa: Dynamic Analysis of Sliding Behavior of Curved Bridge Superstructure Caused by Horizontal Ground Motion, Proc. of JSCE, No.570/I-40, pp.305-314, 1997.7
82. A. Nakajima, D. Miyama, H. Otsuka, T. Sato and M. Suzuki: Estimation Procedure of Nonlinear Maximun Displacement Response of Steel Bridge Pier in Seismic Design, Proc. of JSCE, No.570/I-40, pp.297-304, 1997.7
83. Y. Yamazaki, M. Akiyama and M. Suzuki: Safety Evaluation Method of RC-Bridge Pier under Earthquake Based on Reliability Theory, Proc. of the JCI, Vol.19, No.2, pp.441-446, 1997.6
84. S. Tanaka, A. Takeda, K. Ibayashi and M. Suzuki: Influence of the Mechanical Characteristics of Middle Height Beam on the Seismic Performance of RC 2-Story Viaduct, Proc. of the JCI, Vol.19, No.2, pp.435-440, 1997.6
85. M. Suzuki, K. Ibayashi, Y. Akakura, M. Fujiwara and Y. Ozaka: Evaluation Method of Seismic Reliability in Reinforced Concrete Structure within Lifetime, Proc. of JSCE, No.564/V-35, pp.253-263, 1997.5
86. A. Nakajima, O. Onodera, H. Otsuka, M. Suzuki and T. Sato: A Fundamental Study on Seismic Strengthening Method for Steel Bridge Pier by Means of Glueing Row Yield Stress Steel Plate, Proc. of JSCE, Jounal of Structural Engineering, Vol.43A, pp.889-896, 1998.
87. Y. Akakura, M. Suzuki, A. Takeda, M. Fujiwara and Y. Ozaka: Evaluation of Damage Index of Reinforced Concrete Structure and its Application to Seismic Design, Proc. of JSCE, No.544, pp.205-221, 1996.
88. M. Suzuki, H. Adachi, Y. Akakura, K. Ibayashi and Y. Ozaka: Evaluation of Lifetime Risk of Reinforced Concrete Structure, Proc. of JSCE, No.532, pp.15-28, 1996.
89. M. Suzuki, S. Asai, N. Isago, A. Takeda and M. Fujiwara: Influence of the Characteristics of Ground on the Dynamic Behavior of RC2-story Viaduct, Proc. of JSCE, Jounal of Structural Engineering, Vol.42A, pp.603-614, 1996.
90. M. Suzuki, J. Satoh, Y. Itoh, H. Ishida and Y. Ozaka: Analysis of Deformation of Reinforced Concrete Beams under Cyclic Bending, Proc. of JSCE, Jounal of Structural Engineering, Vol.41A, pp.1041-1050, 1995.
91. M. Suzuki, S. Takisawa, N. Isago and Y. Ozaka: Influence of the Characteristics of Ground on the Dynamic Behavior of RC2-story Viaduct, Concrete Research and Technology Japan Concrete Institute, Vol.6, No.2, pp.63-76, 1998.
92. M. Suzuki, Y. Akakura, H. Adachi and Y. Ozaka: Evaluation of Damage Index for Reinforced Concrete Structures, Concrete Library International, No.26, pp.1-17, 1995.
93. M. Suzuki, Y. Akakura, H. Adachi and Y. Ozaka: Evaluation of Damage Index of Reinforced Concrete Structure, Proc. of JSCE, No.490, pp.121-129, 1994.
94. K. Kawashima, T. Nakajima, T. Satoh, M. Suzuki and H. Ozaka: Experimental Study Evaluation the Ductility of Steel Piers, JSSI, Journal of Constructional Steel, Vol.2, pp.41-46, 1994.
95. M. Suzuki, K. Imafuku, G. Ohashi, N. Maeda and Y. Ozaka: Experimental Study on Shear Capacity of Ultra High Strength Concrete Beams without Stirrups, Vol.40A, pp.1369-1380 ,1994.
96. M. Suzuki, K. Ichikawa, J. Sato and Y .Ozaka: Evaluation of Flexural Deflection and Minimum Tension Bar Ratio of RC Beams, Concrete Research and Technology Japan Concrete Institute, Vol.3, No.1, pp.51-63, 1994.
97. M. Suzuki, M. Watanuki, S. Takisawa and Y. Ozaka: Evaluation of Aseismic Performance of RC 2-Story Viaduct by Means of Dynamic Response Analysis, Concrete Research and Technology Japan Concrete Institute, Vol.4, No.1, pp.67-78, 1993.
98. M. Suzuki, M. Horiuchi, N. Maeda and Y. Ozaka: Flexural Properties of RC Beams Using of Ultra High Strength Materials, Concrete Research and Technology Japan Concrete Institute, Vol.4, No.1, pp.39-52, 1993.
99. M.Suzuki, Y.Ozaka and K.Imafuku: Shear Characteristics of Ultra High Strength Concrete Beam without Shear Reinforcement, JCA Proceedings of Cement & Concrete, No.47, pp.558-563, 1992.
100. Y. Ozaka, M. Suzuki and N. Maeda: Experimental Study on Mechanical Characteristics of Ultra High Strength Concrete Beam under Flexural Loading, JCA Proceedings of Cement & Concrete, No.46, pp.844-849, 1992.
101. M. Suzuki, M. Watanuki and Y. Ozaka: Evaluation of Behavior during Earthquake of RC Viaduct by Means Dynamic Response Analysis, JCA Proceedings of Cement & Concrete, No.46, pp.726-731, 1992.
102. M. Suzuki, Y. Takahashi and Y. Ozaka: Influnce of Human Error on Safety of RC Structure, Journal of JSCE, No.451, pp.159-168, 1992.
103. M. Suzuki, I.Jang, M. Watanuki and Y. Ozaka: Study on the Pullout Property of Axial Bars from a Footing, Concrete Research and Technology Japan Concrete Institute, Vol.3, No.1, pp.33-44, 1992.
104. M. Suzuki, S. H. Kang and Y. Ozaka: Study on a Design Method for RC Members Subjected to Flexure-Shear and Axial Load, Concrete Library International, No.19, pp.179-197, 1992.
105. M. Suzuki, H. Chida, M. Koudou and Y. Ozaka: Seismic Risk Analysis Based on Strain Energy Accumulation in Focal Region, Proc. of JSCE, No.437, pp.49-58, 1991.
106. M. Suzuki, S. H. Kang and Y. Ozaka: Study on the Design Method for RC Members Subjected to Flexure-Shear and Axial Load, Journal of JSCE, No.433, pp.129-138, 1991.
107. M. Suzuki, S. H. Kang and Y. Ozaka: Analytical Study on the Interaction among Ultimate Strengths of RC Members Subjected to Flexure-Shear and Axial Load, Journal of JSCE, No.426, pp.193-202, 1991.
108. M. Suzuki, T. Nakamura, M. Horiuchi and Y. Ozaka: Experimental Study on Influence of Tension Force on Dowel Effect of Axial Bars, Journal of JSCE, No.426, pp.159-166, 1991.
109. M. Suzuki, S. H. Kang and Y. Ozaka: Analytical Study on the Shear Capacity of Reinforced Concrete Beams with Web Reinforcements, Journal of JSCE, No.426, pp.111-120, 1991.
110. M. Suzuki, S.Kang and Y. Ozaka: Evaluation of Shear Capacity and its Application to Design of RC Membrer, Proc. of the JCI, Vol.13, No.2, pp.191-196, 1998.
111. M. Suzuki, S. H. Kang and Y. Ozaka: Evaluation of Shear Capacity of RC Member and its Application to Design, Transactions of the Japan Concrete Institute, Vol.13, pp.519-526, 1991.
112. M. Suzuki, S. H. Kang and Y. Ozaka: Analytical Study on the Shear Capacity of Reinforced Concrete Beams with Web Reinforcement, Concrete Library International, No.18, pp.123-140, 1991.
113. T. Nakamura, M. Suzuki and Y. Ozaka: Load-Displacement Relationships and Evaluation of Ductility of RC Members under Alternating Cyclic Loading, Proceedings of the Japan Concrete Institute, Vol.11, No.2, pp.269-274, 1989.
114. Y. Ozaka, M. Suzuki and H. Kanie: Effects of Loading Rate and Loading Pattern on Behaviours of Reinforced Concrete Columns, Journal of Structural Engineering, Vol.34A, pp.911-922, 1988.3
115. Y. Ozaka, M. Suzuki, Y. Takeyama and H. Kikuchi: Analysis of Damages Inflicted on Reinforced Concrete Viaducts during the Miyagiken-oki Earthquake, Concrete Library International, No.11, pp.145-163, 1988.
116. M. Suzuki, Y. Takeyama, H. Kikuchi and Y. Ozaka: Analysis of Damages Inflicted on Reinforced Concrete Viaducts during the Miyagiken-oki Earthquake, Journal of JSCE, No.384, pp.43-52, 1987.
117. Y. Ozaka, M. Suzuki, M. Miyamoto and S. Kobayashi: Evaluation of Shear Strength for Reinforced Concrete Beams with Bars Terminated in Tension Zones and its Application to Design, Journal of JSCE, No.378, pp.89-96, 1987.
118. Y. Ozaka and M. Suzuki: Behaviours of Reinforced Concrete Columns under Static Alternating Cyclic Loads, Concrete Library International, No.10, pp.45-62, 1987.
119. Y. Ozaka and M. Suzuki: Study on Shear Failure and Repair Method of Reinforced Concrete Beams, Concrete Library International, No.9, pp.17-32, 1987.
120. Y. Ozaka, M. Suzuki, H. Ishida and M. Miyamoto: Bond Failure of Reinforced Concrete Members and Effectiveness of Rerairs by Epoxy Resin Injection, Journal of JSCE, No.372, pp.121-130, 1986.
121. Y. Ozaka, M. Suzuki, S. Kuwasawa and T. Ishibashi: Load-Deflection Characteristics of Reinforced Concrete Columns under Static Aletenating Cyclic Loads, Journal of JSCE, No.372, pp.45-54, 1986.
122. Y. Ozaka, M. Suzuki, M. Terasawa and S. Kobayashi: Effect of Bar Cutoff on Shear Strength of Reinforced Concrete Beams, Journal of JSCE, No.366, pp.133-142, 1986.
123. Y. Ozaka, M. Suzuki and K. Kondou: Safety Evaluation of RC Bridge Pier during an Earthquake, The 46th Annual Meeting of CAJ, pp.510-513, 1986.
124. Y. Ozaka, M. Suzuki and S. Kobayashi: Effect of Bar Cutoff on Shear Strength of Reinforced Concrete Beams, Concrete Library International, No.8, pp.117-132, 1986.
125. Y. Ozaka, M. Suzuki, H. Ishida and K. Kato: Study on Shear Failure and Repair Method of Reinforced Concrete Beam, Journal of JSCE, No.360, pp.119-128, 1985.
126. Y. Ozaka, K. Otsuka, Y. Matsumoto and M. Suzuki: Cracking Properties of Axially-Loaded RC Tensile Specimens under Influence of Drying, Transactions of the Japan Concrete Institute, Vol.7, pp.347-360, 1985.
127. Y. Ozaka, M. Suzuki and T. Kondo: Relation between Moment and Curvature for Reinforced Concrete Member, Proc. of the JCI, Vol.1, pp.349-352, 1979.
128. Y. Ozaka, M. Suzuki and R. Hara: Study on the Safety of Reinforced Concrete Structure, Proc. of the JCI, Vol.1, pp.345-348, 1979.

Back to Labs
Structural Design Engineering